Dual MXD13 Series User Manual

2
MXD13
INSTALLATION
Preparation
Please read entire manual before installation.
Before You Start
•
Disconnect negative battery terminal. Consult a qualified technician for
instructions.
Getting Started
•Insert the supplied keys into the slots as shown, and slide the unit out of the
mounting sleeve.
•Install mounting sleeve into opening, bending tabs to secure.
•Connect
wiring harness and antenna. Consult a qualified technician if you are
unsure.
•Test for correct operation and slide into mounting sleeve to secure.
•Snap trim ring into place.
TYPICAL
FRONT-LOAD
DIN MOUNTING
METHOD

Dual MXD13 Series Specifications

General

Brand	Dual
Model	MXD13 Series
Category	Receiver
Language	English