How to fix a Dual XDVD276BT that won't turn on?
If your Dual Car Receiver won't turn on, it could be due to several reasons: * The yellow or red wire might not be connected properly or have incorrect voltage. Ensure these wires are correctly connected and have a voltage between 11 and 16VDC. * The black wire may not be connected to ground. Check this connection. * The fuse might be blown. If so, replace it with a new one.
Why does my Dual XDVD276BT keep blowing fuses?
If your Dual Car Receiver keeps blowing fuses, there are a few potential causes: * A yellow or red wire might be touching the chassis ground. Inspect these wires for any pinching. * Speaker wires could also be touching the chassis ground. Check them for pinching as well. * The fuse rating might be incorrect. Make sure you are using fuses with the correct rating.
What to do if my Dual XDVD276BT Car Receiver has power but no sound?
If your Dual Car Receiver has power but no sound, consider the following: * The speaker wires might not be connected properly. Check the connections at the speakers. * One or more speaker wires might be touching each other or the chassis ground. Insulate all bare speaker wires from each other and the chassis ground.
Why does my Dual Car Receiver have audio but no video?
If your Dual Car Receiver has audio but no video, it might be because: * The parking brake safety circuit is not connected. Check the connections at the parking brake. * The parking brake is not applied. Apply the parking brake.
How to stop my Dual XDVD276BT from skipping?
Excessive skipping on your Dual Car Receiver can be caused by: * Incorrect mounting of the unit. Check the mounting sleeve. * Physical defects in the media. Inspect the disc for scratches.
Why is there no video display when reversing with my Dual Car Receiver?
If there is no video display when your Dual Car Receiver is in reverse, it could be due to: * The reverse circuit not being connected. Check the connections at the reverse lamp. * The vehicle not actually being in reverse. Select reverse gear.
What to do if DVD does not start playback on my Dual Car Receiver?
If your Dual Car Receiver DVD does not start playback, it may be due to: * Physical defects in the media. Check the disc for scratches. * Using the wrong region code. Use discs labeled "Region 1" or "All" only.
What does 'Disc Region Incorrect' mean on my Dual XDVD276BT Car Receiver?
If 'Disc Region Incorrect' appears on the display of your Dual Car Receiver, it means there is a region code error. Use discs labeled "Region 1" or "All" only.
Why is the IR remote not working on my Dual XDVD276BT Car Receiver?
If the IR remote for your Dual Car Receiver isn't working, the battery may be dead. Replace it with a new one.
General| Screen Size | 6.2 inches |
|---|---|
| Resolution | 800 x 480 |
| Bluetooth | Yes |
| USB Input | Yes |
| Auxiliary Input | Yes |
| Built-in Amplifier | Yes |
| Remote Control | Yes |
| DVD Player | Yes |
| SD Card Input | Yes |
| Peak Output | 200 watts |
| Navigation | No |
| Steering Wheel Control Compatible | Yes |
| Backup Camera Input | Yes |
| AM/FM Tuner | Yes |
| Power Output | 50 watts x 4 channels |
| Rear Camera Input | Yes |
| RCA Preamp Outputs | 3 (Front, Rear, Subwoofer) |
| Preamp Outputs | 3 Pairs |
| Display | LCD |
| Compatibility | MP3/WMA |
To Next Page
