Need help?Do you have a question about the Dual XPR540 and is the answer not in the manual?
General| RMS Power Output (2 Ohms) | 75W x 4 |
|---|---|
| Bridged Power Output (4 Ohms) | 150W x 2 |
| Frequency Response | 20 Hz - 20 kHz |
| Signal to Noise Ratio | >90 dB |
| THD at Rated Power | <0.05% |
| Bass Boost | 0-12 dB |
| Crossover Slope | 12 dB/octave |
| Input Sensitivity | 200mV to 6V |
| RMS Power Output (4 Ohms) | 50W x 4 |
| RMS Power @ 4 Ohms | 50W x 4 |
To Next Page
