Dual XVM296BT - Installation Preparation; Before You Start; Getting Started

3
Before You Start
•
Disconnect negative battery terminal. Consult a qualified technician for instructions.
•
Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it
would be subject to dust, dirt or excessive vibration.
Getting Started
•
Certain vehicles may require an installation kit and/or wiring harness adapter (sold separately).
• Snap trim ring into place (if required).
XVM296BT INSTALLATION
Preparation
TYPICAL FRONT-LOAD DIN MOUNTING METHOD
Trim Ring
Main Unit
Taptite Truss
Head 5x6mm
Taptite Binding
Head 5x6mm