DQ-MINI User Manual, Version: 1.00
08. Function configuration (Communication setting)
Changing the reader settings is also possible using the SDK (DualCard program) provided by
DUALi. You can easily change the setting of DQ-MINI by executing the corresponding command
referring to the communication frame below. (For more information on dual cards, please refer to
DUALi SDK Manual.)
※ STX, LENH (Length High) and LENL (Length Low) value of each communication frame are
automatically calculated in the dual card program. Just input corresponding value on each CMD/
DATA fields.
To Next Page
Loading...