Duali DQ-MINI - QR Reading Timeout

DQ-MINI User Manual, Version: 1.00
www.duali.com 17
08.5 QR Reading timeout
Following is the communication frame for same QR reading timeout setting. Since it is saved
in flash memory after the first setting, the reader does not need to be set again.
(115,200bps, 8 data, no parity, 1 stop bit)
STX
LENH
LENL
CMD
DATA[0]
DATA[1]
LRC
0x02
0x00
0x02
0xE3
0x01
DATA[1]
LENH^LENL ^ CMD ^
DATA[0]^DATA[1]^DA
TA[2]
DATA[1]
State
Description
0x05~0x32
Timeout Parameter
Set same QR reading timeout
(Range: 05~0x32(=50))
Each numbers are automatically multiplied by DQ-
MINI
(^: exclusive oring)
Tip – To set the same QR read timeout for 1.6s(1600ms)