Ducati 999R User Manual

E
32
Gearchange pedal adjustment (fig. 26)
Gear change pedal position relative to the footpeg may be
adjusted to suit rider preferences.
There are three different adjustments available:
Approximate adjustment of pedal position
Fit a wrench into the socket (1) to lock out removable
linkage rotation and slacken the locknut (3). Release and
remove the screw (2) and adjust the linkage axially so as to
set the gear change pedal in the desired position.
The linkage has four positions determined by the axis of
the screw (2). When finished, tighten the screw (2) and
the locknut (3).
Fine adjustment
Fit a wrench into the socket (1) to lock out removable
linkage rotation and slacken the locknut (3). Rotate the
linkage working the socket (1) so as to set pedal in the
desired position. When finished, tighten the locknut (3).
Combined adjustment
Both adjustment techniques may be used together.
Make sure to tighten locknut (3) and screw (2) when
finished.
2
1 3
fig. 26

Ducati 999R Specifications

General

Transmission	6-speed
Frame	Tubular steel trellis
Bore x Stroke	104 x 58.8 mm
Power	140 hp (104 kW) @ 9750 rpm
Torque	108 Nm @ 8, 000 rpm
Rear Suspension	Öhlins fully adjustable monoshock
Front Brakes	Dual 320mm discs, 4-piston calipers
Rear Brakes	240 mm disc, 2-piston caliper
Fuel Capacity	15.5 liters
Fuel Injection	Electronic fuel injection
Front Suspension	Öhlins 43 mm fully adjustable upside-down fork