49
E
Service menu - units of measurement
(UNIT SET)
This function allows you to set the units of measurement for
the values displayed on the instrument panel.
To enter the service menu, press and hold button (1, fig. 10)
in position A “▲” while turning the ignition switch from
“Off” to “On”.
Note
Within this menu, any other function is disabled and
engine starting is disabled as well.
The first function displayed is “Immobilizer Reprogramming”
(00000 PRO), press button (1, fig. 10) in position A “▲“ to
display the other function of the service menu “UNIT SET”.
Now press button (1, fig. 10) in position B “▼” for 3 seconds.
Every time you press button (1, fig. 10) in position B “▼”, the
instrument panel toggles through the following flashing
values:
Press button (1, fig. 10) in position B “▼” for 3 seconds to
store the displayed settings, the message “MEM” confirms
storage.
Upon the following Key-On the instrument panel will be set
to the new settings.
UNIT OF MEASUREMENT
Country
standard
Speed Air
temperature
Odometer/
trip meters
EU Km/h °C Km
EN Mph °C miles
USA Mph °F miles
CND Km/h °C Km
FRA Km/h °C Km
JAP Km/h °C Km
ECU ld. The instrument panel sets units of
measurement according to ECU
information
https://www.motorcycle-manual.com/
To Next Page
Loading...
