62
E
Helmet cable
Note
Helmet cable (1, fig. 49) can be found inside the tool kit,
see “Tool kit and accessories,” on page 74.
Pass the cable through the helmet and insert the end of the
cable in the pin (2, fig. 49). Leave the helmet hanging and
refit the seat to hold it in place.
Warning
This device protects the helmet against theft when the
motorcycle is parked. Do not leave the helmet attached
when riding the motorcycle; it could interfere with your
movements and cause loss of control of the motorcycle.
https://www.motorcycle-manual.com/
To Next Page
Loading...
