60
E
Tank filler plug
Opening
Raise the cover (1) and insert the key into the lock. Give the
key a 1/4 turn clockwise to unlock.
Lift the cap.
Closing
Close the cap with the key inserted and push it into its seat.
Turn the key anticlockwise to the initial position and remove
it. Replace the lock cover (1).
Note
The cap can only be closed with the key inserted.
Warning
Always make sure you have properly refitted (see page
72) and closed the plug after each refuelling.
https://www.motorcycle-manual.com/
To Next Page
Loading...
