Ducati MONSTER 2012 - Page 93

92
E
Locate the breather/drain hose (10) on the motorcycle and
secure it in position by refitting the cover (8).
Fit the two screws (9), remembering to fit the longest screw
in the lower hole, and tighten to a torque of 10 Nm.
Secure the oil hoses with the clips (F) and tighten the screw
(E) to a torque of 10 Nm ±10%.
F
E
10
8
9
fig. 89
https://www.motorcycle-manual.com/