Multimedia Function
Debounce Time Setting
Fn + W
Fn + A
Mouse cursor up
Mouse cursor left
Fn + S
Fn + D
Mouse cursor down
Mouse cursor right
Fn + Q
Fn + E
Left mouse button
Right mouse button
Fn + R
Fn + F
Roller up
Roller down
Note:
The method is to adjust the debounce time of the metal shrapnel in the mechanical shaft during the pressing
process. The shorter the time, the sooner it can be triggered, but if the time is too short may cause misjudgement.
If it’s not necessary to change the time, the default value is recommended.
Fn + Alt + Y
Fn + Alt + U
Fn + Alt + I
Fn + Alt + O
5ms
10ms (Default)
15ms
25ms
Hold the combine keys for 3 sec, the
keyboard will flash 3 times to indicate the
debounce time has been switched
successfully.
30
To Next Page
Loading...
