Ducky One 3 - RGB LED Zone Customization; CM1;CM2 Cycle and Recording

RGB LED Zone
Customization
Modes
CM1 Cycle:
First Step: Turn on user’s customized zone
and color.
Second Step: Turn o CM1.
Erase ALL LED light
To set up Red / Green / Blue LED Color
REC1, recording CM1
REC2, recording CM2
Fn + F11
Fn + F12
Fn + PrtSc
Fn + Pause
CapsLock + F5 / F6 / F7
CapsLock + F8
REC OverCapsLock + ScrLk
CapsLock + Spacebar
Color Palette
CM2 Cycle:
First Step: Turn on user’s customized zone
and color.
Second Step: Turn o CM2.
23