Ducky One 3 - Ducky Macro V2.0 Profile Management

Ducky Macro V2.0
Step1.
Profile Selections
Fn+
Switch to profile 1
Switch to profile 2
Switch to profile 3
Switch to profile 4
Switch to profile 5
Switch to profile 6
Factory settings (Default)1
2
3
4
5
6
=
Customize Macro Key
Features
Note:
Once the profile is selected then the CapsLock or indicator lights will blink in the amount
of selected profile number.
Step2. To enter Macro recording
Press and hold Fn + Alt + Tab for 3 seconds to enter Macro recording.
Once in recording mode the CapsLock or indicator lights will flash slowly.
Step3. Press a key to start recording Macro
Press on the key you want to use to activate Macro. The key pressed will blink (Non-backlit
version will not) and the CapsLock or indicator lights will flash swiftly.
Step4. Recording Macro
Enter any key, and choose the Macro implementation and Record Time option.
Step5. To exit or continuing recording
Press and hold Fn + Alt + Tab for 1 seconds to exit recording or press Fn + Alt to continue.
30