23
DY CAT 48
How manage the valves:
ATTENTION !
Before using fresh water terminal sas sinks, shower mixers, shower deck or washdown
system make sure all the valve of the line till terminal are open
All the valves are ball valve type
- OPEN position: lever in the direction of the valve body,
- CLOSED position: lever perpendicular to the valve body.
ATTENTION !
• Never touch the tightening of the valves on the hull. In case of leak, consult a
professional.
• In bad weather or when leaving your boat, close all the valves of the sanitary
circuits.
• Keep valves closed when not in use and remember to handle them regularly to
maintain flexibility. A valve that has not been used for too long can finally seize.
• During overwintering, clean and rinse hulls and valves. Inspect the brass
accessories; slight surface corrosion is normal.
• In case of more serious corrosion, consult your dealer.
The shore fresh water inlet valve is located in the starboard aft transom. To use the marina fresh
water:
- Connect the shore supply
- Set the pressure water pump switch to ‘OFF’
To Next Page
Loading...
