33
DY CAT 48
Wintering
Carefully read the operating instructions for the engine that accompanies the boat and the wintering
instruction.
In the absence of details, proceed as follows:
-Close the motor water inlet valve,
-Unplug the hose from the engine inlet valve,
-Drain the sea water circuit,
-Immerse the hose in a permanent liquid -25 °,
-Turn the engine until the liquid is released by the exhaust,
-Reconnect the hose to the valve at the end of the operation,
-Put a display on the electrical panel and the battery cutters indicating that the motor water inlet valve
is closed.
To Next Page
Loading...
