EasyManua.ls Logo

Dufour CATAMARAN 48 - Certification; Hull Identification; Building Plate

Default Icon
91 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
DY CAT 48
Certification
DUFOUR CATAMARANS has chosen the Institute for the Certification and Standardization in the
Nautisme as notified body to check the conformity of your boat with the ENAVE – Ente Navale
Europeo S.r.l., according to the module B.
Hull Identification
The hull identification number is located near the shore power connection. It consists of a series of
letters and numbers starting with IT-JJL
Building Plate
Design Category = A
Max number of people :
WARNING
Do not exceed the maximum number of people recommended. Regardless of the
number of people on board, the total mass of people and equipment must never
exceed the maximum recommended load.
Some of the information is given on the builder's plate
attached to the boat. A full explanation of this
information is given below.
: recommended by the manufacturer when the boat is
sailing in sea conditions corresponding to its design
category.

Related product manuals