Error (ERR) Tone
If a function is inaccessible or a function is performed incorrectly, the base master sounds
two rapid, low pitch tones.
Busy Tone
If the base master attempts to connect to a station that is already in communication with
another base master, the universal busy tone sounds.
Reset Tone
If the base master is reset, it sounds a medium-to-high pitch warble followed by a long,
low tone.
Fail Tone
If the base master fails, it sounds a low pitch warble.
Tone Level
The base master can be programmed with different tone volumes for on duty and off duty
status. See Placing the Master On/Off Duty on page 3-3 and Setting the Tone Level on
page 3-27.
1-4
ProCare 6000 Operation Manual
Base Master Features
To Next Page
Loading...