Placing an Emergency Call
Placing an Emergency Call From a Pull Cord Lavatory or Shower Station
Either pull the station’s cord, or press the PULL FOR HELP button. See Figure 4-5.
When you do, this happens:
•
The station’s call assurance LED illuminates to confirm call placement.
•
The call appears at the base master and the video display (if present).
•
A tone sounds at the base master.
•
A continuous tone sounds at the associated patient station if presence is registered.
•
The associated corridor light illuminates and flashes at a designated rate.
4-12
ProCare 6000 Operation Manual
Placing an Emergency Call
Figure 4-5: Pull Cord Lavatory/Emergency Station and Shower Station
(Models 9A2105 and 9A2106)
To Next Page
Loading...