ALARMS
Figure 5-45 Alarm Message Screen
Terminology: Alarm refers to any fault, or error the press
might produce.
An alarm condition may occur. Figure 5-45 shows the
format for a typical alarm display.
The list below gives general reference information for
each alarm condition.
Table 5-I Alarm Messages
FREQUENCY OVERLOAD FAULT 1
FAULT ID # Uxxx SERIAL # xxxxxx
VISIT WWW.DUKANE.COM/EASYFAULT FOR
FAULT AND TROUBLESHOOTING TIPS,
OR CONSULT YOUR MANUAL
ONLINE
PRESS ENTER TO CLEAR
AMP
PRE
WELD
WELD
POST
WELD
LIVE
SETUPS
LIMITS
OPERATE
Peak Overload Fault
SETUP
(Lock Fail)
(Lock Lost)
(Limit Exceeded)
Page 69
Dukane Manual Part No. 403-594-02
Section 5 - Operation