9
RFHU - Multiuse Operator’s Manual
RFHU OPERATING INSTRUCTIONS Continued
Each recipe is programmed with a “hold time”. The
hold time can be congured for any time between
1 minute to 540 minutes. Pressing on any well will
start the timer.
When a well is started the color of the well will
change to green, use this product rst. When
the second well of the same recipe is started the
started well change to amber, use this next. When
subsequent wells of the same recipe are started,
they will also be amber. If a dierent well is started
with a dierent recipe and there is no other well
running with the recipe - then it will also have green
background.
Three-day part menus are available to be selected
on the runtime screen.
When selected these will change the recipe display.
For example, during Breakfast hours you may hold
dierent recipes to lunch or dinner.
Changing from “Menu 1” to “Menu 2” will change all
non-running programmed recipes name to the new
menu layout.
If a well is currently running and the menu is
changed the new recipe name will not take eect
until the well has been stopped or expired and
cleared.
A Cook More time value can be programmed for
each individual recipe. The “Cook More time” is used
to indicate that the remaining hold time of the
current recipe is low and they should start cooking/
preparing the recipe once more.
A “+” symbol appears on the individual well with the
cook more time indicator.
For example:
When the well countdown timer expires, the timer
shows a "X", the will turns red and an alarm will
sound. Touching the well, cancels the alarm. To
cancel an unexpired timer you must press and hold.
To Next Page
Loading...
