RFHU - Multiuse Operator’s Manual
8
RFHU OPERATING INSTRUCTIONS
When the ReadyFlex™ Holding Unit is turned on the
boot screen will appear rst for 2 or 3 seconds. This
will display the Duke Logo along with the rmware
version number of the RFHU.
RUNTIME SCREEN
After the RFHU has loaded the runtime screen will
load.
Dierent types of information are found on the
runtime screen. Details below.
When the unit rst boots each well will contain a
preheating icon. This indicates the well is heating
to temperature. When the recipe temperature is
reached the preheat icon will clear and the well will
be ready for use.
OVERVIEW
In this instance a 3X4 RFHU has been detected.
A “3X4” has a layout consisting of 3 rows by 4
columns containing up to 12 programmed recipes
in total.
To Next Page
Loading...
