SVENSKA DANSK SUOMEKSI ENGLISH DEUTSCH FRANÇAIS ESPAÑOL ITALIANO POLSKINEDERLANDSNORSK
6 ERROR CODES
ERROR CODE DESCRIPTION
E00 Main power cables loose/defective or main board crashed.
E01
Main power cables loose/defective, heating element damaged
or main board crashed.
E02
Sealing motor damaged, up micro switch defective, wires loose
or no contact with lever arm.
E03
Cassette motor damaged, out micro switch defective, wires
loose or no contact with lever arm.
E04
1. Film sensor defective or dirty reflection mirror
2. Lack of sensor marks on sealing film
3. Film rewinding motor, capacitor or wires loose/defective
4. Motor gears stuck
E05
Cassette motor damaged, in micro switch defective, wires
loose or no contact with lever arm.
E06
Sealing motor damaged, down micro switch defective, wires
loose or no contact with lever arm.
E07 The safety cover has been touched or micro switch defective.
E12
Sealing motor, capacitor or gear box defective. Wires or compo-
nents (up-movement) loose/defective.
E13
Cassette motor, capacitor or gear box defective. Wires or com-
ponents (out-movement) loose/defective.
E15
Cassette motor, capacitor or gear box defective. Wires or com-
ponents (in-movement) loose/defective.
E16
Sealing motor, capacitor or gear box defective. Wires or compo-
nents (down-movement) loose/defective.
E19 Main board error – main circuit board crash.
E20 Power supply error, container sensor or film sensor defective.
Err Power supply error.
12
INSTRUCTIEHANDLEIDING
DF5
NEDERLANDS
To Next Page
Loading...