16
6. PRECAUTIONS BEFORE USE
6-2. PRECAUTIONS FOR STACKING PAPER
• If the paper is not stacked neatly on the paper feed table,
the unit will not be able to read the size of the paper
accurately and as a result, may determine the paper as
outside the standard size. Therefore, be sure to stack the
paper neatly.
The paper feed table has a built-in device for reading
paper size.
Take note that this device will not be able to read the
paper size correctly if the paper is stacked unevenly.
This may as a result cause problems.
• Automatic paper size detection can be carried out for
paper up to ±2.5 mm of the fixed paper.
• If the paper is not stacked properly lengthwise, mis-feed
or chain feed may occur.
• When stacking just a few sheets of paper on the paper
feed table, lower the paper set lever while pressing the
back edge of the paper.
Paper
Guide plate
Paper set lever
To Next Page
Loading...
Need help?
General