38
8-2. REGISTERING THE FOLDING STOPPER CORRECTION
1 Specify the folding mode.
2 Perform test folding.
3 Press the “folding stopper adjusting”
button to adjust the folding slippage.
8. FOLDING ADJUSTMENTS AND REGISTERING CORRECTIONS
(1) Use this correction registration function to memorize the position of the folding
stopper after adjusting the folding slippage in the vertical direction.
(2) This function is extremely useful when folding the same type of paper (size, type,
thickness) at the same folding speed.
(3) Corrections can be registered in every folding mode.
Up to 36 types of correction registrations are possible. However, take note that
corrections cannot be registered in the special folding mode. (This will only
register the special folding method again.)
To Next Page
Loading...
Need help?
General