58
12-2. PAPER HAS SLIPPED NEAR THE PAPER FEED SECTION
12-3. PAPER HAS COILED AROUND THE RUBBER ROLL INSIDE THE UNIT
1 The “Number of sheets/paper length”
display window will show “-
ll
ll
l-”.
2 Increase the paper feed pressure.
• Raise the paper feed pressure adjusting lever one
level at a time.
While observing the paper feed condition.
1 The “Number of sheets/paper length”
display window will show “-
ll
ll
l-”.
If the paper has coiled around the
rubber roll, pull folding plates 1 and 2
to the stopper.
2 Open the top cover, and Pull the
coiled paper towards you to remove it
while rotating the jam correction
handle.
• If the paper cannot be removed easily, insert a
scale, etc. from between the rubber rolls into the tip
of the paper which has coiled around the lower
rubber roll, and while rotating the jam correction
handle, remove the paper.
12. TROUBLESHOOTING
Jam correction handle
Paper
Rubber roll
Paper feed pressure adjusting lever
To Next Page
Loading...
Need help?
General