35
7. OPERATION PROCEDURES
2 Precautions For Selecting The
Folding Mode
• If non-fixed paper of 137 to 157 mm is used, it
cannot be folded in the double fold, irregular
accordion fold, and brochure fold styles.
ò
Measure the length of the paper to be used, and
input its length using the numerical keys.
• If the measurements previously registered and
currently being displayed are not to be used, press
the “clear” button, erase these measurements, and
input the desired measurements.
Note : Take note that desired measurements
cannot be input if the previous
measurements registered have not been
erased.
When new measurements are input, the
registration of the fixed folding correction
using the previous measurements will be
erased.
• When the measurements being displayed are to be
used, there is no need to input the measurements
again.
ô
Continue pressing the “Number of sheets/paper
length” button until the buzzer sounds.
• The display changes to the paper length folding
mode, indicating that operations can be started.
• When non-fixed paper is to be used, the unit cannot
be operated until the paper size display window
shows “LP”.
137 to 157mm
Irregular
accordion fold
Double fold Brochure fold
To Next Page
Loading...
Need help?
General