16
6-2. Description of LCD
(1) Example of LCD message in standard paper/standard folding
6. CONTROL PANEL
LTR +.O3O/-.O4O
STAND BY I
LTR .OOO/ ···
STAND BY
12.O +.O4O/-.O5O
STAND BY
CF-1 5.5O/2.75
STAND BY
The “LTR” displayed at the top left of the screen indicates the paper size.
“+.030” indicates that the folding stopper of folding plate 1 is set 0.03" from the
automatically set position in direction A shown in the figure on the previous
page.
“–.040” indicates that the folding stopper of folding plate 2 is set 0.04" from the
automatically set position in direction B shown in the figure on the previous
page.
The “STAND BY” displayed at the bottom is the area where messages are
displayed.
When “I” or “REF” is displayed at the bottom right and “FIX” is displayed at the top
left, it means that these additional functions are currently being used.
“17. ADDITIONAL FUNCTIONS” (
☞
p.45)
SeeSee
As folding plate 2 is not used in single folding, the display area of the folding
stopper of folding plate 2 shows “· · ·”.
This indicates that the folding stopper of folding plate 2 is at the home position*.
* Home position means the starting position of the folding stoppers of folding plates 1 and 2.
(2) Example of LCD message in standard paper/standard folding (single folding)
“12.0” displayed at the top left of the screen indicates the paper length (unit:
inch).
“+.040” indicates that the folding stopper of folding plate 1 is set 0.04" from the
automatically set position in direction A shown in the figure on the previous
page.
“–.050” indicates that the folding stopper of folding plate 2 is set 0.05" from the
automatically set position in direction B shown in the figure on the previous
page.
(3) Example of LCD message in non-standard paper/standard folding
Length of
folded plane
The “CF-1” displayed at the top left of the screen indicates that custom folding
mode 1 is selected.
“5.50” indicates that the length of the folded plane by folding plate 1 (see left
figure) will be about 5.5".
“2.75” indicates that the length of the folded plane by folding plate 2 will be about
2.75".
(4) Example of LCD message in custom folding
The value displayed by the LCD is an approximate, and the actual folded size
may differ according to the thickness and characteristics of the paper used.
NoteNote
To Next Page
Loading...
Need help?
General
