47
17. ADDITIONAL FUNCTIONS
Setting the refold mode/folding
stopper fixed mode
The refold mode and folding stopper fixed
mode can be set using the same method.
While pressing the stop key, press the
custom folding registration key 1.
The top of the LCD shows “SET FUNCTION”.
1
SET FUNCTION
OFF
SET FUNCTION
LAST TIME FOLD
SET FUNCTION
STOPPER FIXED
LTR .OOO/ .OOO
STAND BY REF
FIX 5.5O/O.OO
STAND BY
LTR .OOO/ .OOO
STAND BY
Select the mode.
Press the “+” or “–” speed key, and select from “OFF”,
“LAST TIME FOLD”, and “STOPPER FIXED”.
At shipment, this is set to “OFF”.
Select “OFF” when not using this function.
2
<When refold mode> <When folding stopper
fixed mode>
Register the mode selected.
While pressing the stop key, press the custom folding
registration key 1.
When the refold mode is registered, the bottom right of
the LCD shows “REF”.
When the folding stopper fixed mode is registered, the
top left of the LCD shows “FIX”.
3
<When refold mode> <When folding stopper
fixed mode>
Clearing the refold mode/folding stopper
fixed mode
Select “OFF” in step 2 of the above setting procedure, and
register again using the method in step 3.
When cleared, the “REF” or “FIX” displayed on the LCD
disappears.
When the folding stopper fixed mode is cleared,
the folding stoppers start moving to the home
position, and the LCD displays “WAIT”.
Operations are disabled until the message
changes to “STAND BY”.
NoteNote
To Next Page
Loading...
Need help?
General
