Duplo DocuCutter DPC-400 - Wheel Tool Settings; Wheel Tool Delay and Angle

20
WHEEL TOOL SETTING DELAY (Not Used) ANGLE
Wheel Down Speed: Maximum
down speed of wheel
700(default)
Lifter1 Delay: 0 Pen Dec Angle: 0.0
Wheel Speed: Maximum speed
of wheel
700 (default)
Knives1 Delay: 0 Pen Stop Angle: 20.0
Wheel Acc: Acceleration Speed
of Wheel
2500 (default)
Cut Up: 0 Cut Dec Angle: 0.0
Wheel down Accel: Acceleration
speed of wheel
2000 (default)
Cut Down: 0 Cut Stop Angle: 20.0
Wheel Up: 0 Raise Angle: 30.0
Wheel Down: 0