Duplo DP - M310 User Manual

77
5
Replacing Consumables
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Turn power on, Push the master set switch.
The master will be pulled in, and cut automatically.
If the master does not go in correctly, turn power
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Remove the trimmed piece of the master.
W
ARNING
•
Do not remove the cover af
fixed with W
arning
Label 1.
•
Personnel may be injured by the movable
cutter inside the machine.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Replacing the Master Roll
/THERMAL HEAD
ESCAPE LEVER
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
¡¡
If the master is wrinkled:push down the
thermal head escape lever
2 or 3 times.
¡¡
When the master stops, make sure that
you remove the trimmed piece of the
master.
¡¡
The cutter operates and stops after the
master is cut.
Remove the cut piece left inside the
machine.
Gently c
lose the Upper cover.
MASTER SET SWITCH
IMPORTANT
IMPORTANT
Upper cover
off and pull master back.

Duplo DP - M310 Specifications

General

Brand	Duplo
Model	DP - M310
Category	All in One Printer
Language	English