About the Microinverter
This system is composed of a family of microinverters that convert direct current (DC) into alternating
current (AC) and feeds it into the public grid. The system is designed for the incorporation of one
microinverter for one, two, or four photovoltaic modules. Each microinverter works independently to
deliver the maximum power generation of each photovoltaic module. This setup enables the user to
control the production of a single photovoltaic module directly, consequently improving the exibility and
reliability of the system.
About the Manual
This manual contains important instructions for the D350-Ml
/
D700-M2
/
D1500-M4 microinverters. It
must be read in its entirety before installing or commissioning the equipment. For safety, only qualied
technicians or account administrators, who have received training or have demonstrated skills can install
and maintain this microinverter under the guide of this document.
Other Information
Product information is subject to change without notice. Please refer to Power Center ocial website at
www.duracellpowercenter.com for the latest version of the installation manual.
To Next Page
Need help?
General
