Duracell POWERPACK 600 - Page 16

Feature
6
7
8
Not
shown
Duracell® Powerpack 600 Features
Description
5 W incandescent light illuminates for about 50 hours when the
battery
is fully charged.
3
AC Outlets are standard 3-prong outlets supplying 120 V AC
power for running an AC appliance.
AC Outlet ON/OFF switch illuminates when the switch is turned on.
Audible
Alarm (inside the unit) sounds in the event of overheating
or low battery protection on inverter.
Control Panel Operation
Required
How
to... Condition Required Action Note
Monitor total
ACpower
consumed by
the
applications
powered from
the 3 AC
outlets
Monitor
battery
charging status
Inverter's
ON/OFF
switch is turned ON;
Output Power (W)
light illuminates
(green);
AC charger is
unplugged from the
wall AC outlet.
Inverter's
ON/OFF
switch is turned to
OFF;
All appliances must be
disconnected from the
AC and DC power
outlets;
The
ON/OFF switch of
the incandescent light
must be turned to
OFF;
The AC charger must
be plugged into the
charger input socket
and also into a
household AC outlet.
No action required.
The digital display
will show the AC
power drawn from the
inverter
by the
applications powered
from the AC outlets.
No action required.
A flashing green
Charging Status
light indicates thatthe
battery in the
Powerpack needs
recharging and that
the AC charger is
charging the battery.
A steady green
Charging Status
light indicates that the
battery is fully
charged and the
Powerpack is ready
for use.
In order to save the
battery power and
ensure longer inverter
run time, press
Display
Function button to turn
off the digital display.
Press
DisplayFunction
button again to tum the
display on for AC
power reading.
Recharging with the
supplied AC charger is
a true "plug-in-and-
forget" charging
method.
We recommend leaving
the AC charger
connected when the
Powerpack is not in
us~
to permanently
maintain the battery in
fully charged condition.
975-0339-01-01
5