DuraLabel PRO - Table of Contents

DuraLabel.com | 800.788.5572 Contents | 1
Contents
1. Introduction 2
2. Equipment Checklist 3
3. Loading the Printer 4
3.1 Loading Ribbon 4
3.2 Loading Vinyl Supply 6
4. Connecting the Printer 7
4.1 Upgrading a Driver 7
4.2 Using a USB Cable 8
4.3 Using a Parallel Cable 9
5. Configuring Printer Drivers 11
5.1 Continuous Vinyl Printing Instructions 11
5.2 Die-cut Label Printing Instructions 12
5.3 B Mark Label Printing Instructions 12
6. Installing Label Software 13
6.1 DuraSuite Labeling Software 13
6.2 LabelForge Labeling Software 13
NOTE: This DuraLabel PRO/PRO 300 QuickStart Guide includes information for both
the DuraLabel PRO and DuraLabel PRO 300 Printers. References in this Guide to
“DuraLabel PRO” apply to both the DuraLabel PRO and DuraLabel PRO 300 Printers.