We have engineered the Evader ST to take the rough and
tumble abuse that makes R/C stadium trucks fun.We are so
confident of the quality and durability of the Stress-Tech
plastic parts that we will replace any Stress-Tech plastic part
you break during the first 12 months you own the truck. Just
send in the part to us and we will send you a FREE
replacement. Please see the Evader ST parts list for the
items covered under the Stress-Tech guarantee.
To receive your free replacement part please send the
following to the Hobby Services address listed on the cover
of this manual.
❏ 1. The broken part must be included.
❏ 2. The part number and description of the broken part.
❏ 3. Dated copy of your invoice or purchase receipt.
❏ 4.Your name, phone number and shipping address.
Repair service is available anytime.
• After the 90 day warranty, you can still have your Evader
ST repaired for a small charge by the experts at
DuraTrax's authorized repair facility, Hobby Services, at
the address listed on the front page of this manual.
To speed up the repair process, please follow the
instructions listed below.
❏ 1. Under most circumstances return the ENTIRE system:
truck and radio. The exception would be sending in a
Stress-Tech part. See the instructions under Stress-
Tech Guarantee.
❏ 2. Make sure the transmitter is turned off, and all of the
batteries are removed.
❏ 3. Send written instructions which include: a list of all
items returned, a THOROUGH explanation of the
problem, the service needed and your phone number
during the day. If you expect the repair to be covered
under warranty, be sure to include a proof of date of
purchase (your store receipt or purchase invoice).
❏ 4. Also be sure to include your full return address.
All pictures, descriptions and specifications found in this
instruction manual are subject to change without notice.
DuraTrax maintains no responsibility for inadvertent errors
in this manual.
To operate the Evader ST the following items are required:
❏ DuraTrax 6 cell battery pack (DTXC2065)
❏ DuraTrax 6-7 cell charger (DTXP4000)
For the pre-built version of the Evader ST, you will
also need:
❏ 2-channel radio with one (1) standard servo (FUTJ24**)
❏ Eight (8) “AA” batteries (for the transmitter)
❏ Hobby knife (HCAR0105)
❏ #11 Blades (HCAR0211)
❏ #2 Phillips head screwdriver (DTXR0124)
❏ Needle nose pliers (DTXR0300)
❏ 3/32", 1.5mm & 2.5mm hex Wrenches
❏ Turnbuckle wrench
❏ Nut driver (4-way)
TOOLS INCLUDED FOR MAINTENANCE
AND CLEANING
TOOLS NEEDED FOR COMPLETION
REQUIRED ITEMS FOR COMPLETION
SPECIFICATION & DESCRIPTION CHANGES
REPAIR SERVICE
STRESS-TECH
™
PARTS GUARANTEE
3
To Next Page
Loading...
