6.12 Adjusting the sewing-foot pressure
The sewing-foot pressure is adjusted with knob 1.
–
to increase sewing-foot pressure = turn knob 1 clockwise
to decrease sewing-foot pressure = turn knob 1 anti-clockwise
6.13 Adjusting the stitch length
The stitch length is adjusted with knob 2.
–
to increase stitch length = turn knob 2 clockwise
to decrease stitch length = turn knob 2 anti-clockwise
–
To sew bar-tacks manually press stitch-regulating lever 3 down.
The machine sews backwards for as long as the stitch-regulating lever 3 is held
down.
The stitch length is the same as that set for sewing forwards.
See also section 8.
NB:
With stitch lengths over 8 mm the speed of rotation of the sewing drive is automatically
reduced.
This is to avoid overloading the stitch-setting transmission.
B
C
E
1
2
3
18
To Next Page
Loading...
