Need help?Do you have a question about the DURKOPP ADLER 745-35-10 A and is the answer not in the manual?
General| Brand | DURKOPP ADLER |
|---|---|
| Model | 745-35-10 A |
| Category | Sewing Machine |
| Language | English |
Provides fundamental safety guidelines for machine operation and personnel.
Explains signal words and symbols indicating danger levels and types.
Provides instructions on how to safely replace sewing machine needles.
Guides through the process of threading the needle with thread.
Discusses how thread tension affects the seam pattern.
Explains how to adjust the tension for the needle thread.
Describes how to set the tension for the bobbin thread.
Guides on how to adjust the corner knife for proper operation.
Provides instructions on how to start and perform sewing operations.
Details the steps required to initiate the sewing process.
Explains working method A for the production of trousers.
Explains working method A for the production of jackets.
Guides on how to create or modify sequences of seam programs.
Explains how to select and add pocket programs to a seam sequence.
Details how to assign pocket programs to available slots in a seam sequence.
Instructions on how to change or update existing seam sequence templates.
How to activate a specific pocket program within a seam sequence.
Enables automatic sequential sewing of pocket programs.
Accesses settings for configuring pocket programs and seam parameters.
Details how to select individual pocket programs for configuration.
Steps to create a new seam program from scratch.
Settings for seam securement at the beginning for left and right needles.
Settings for seam securement at the end for the left needle.
Settings for seam securement at the end for the right needle.
Adjusts the light barrier settings for seam beginning and end.
Adjusts settings related to the sewing head, such as speed and transport.
Configures parameters for a gradual start of the sewing motor.
Sets the RPM for seam securement at the beginning and end.
Adjusts settings for the middle knife, including its operation and corrections.
Adjusts corrections for the middle knife at the start and end of seams.
Configures parameters for the corner knife when sewing straight pockets.
Configuration for corner knife parameters for slanted pockets on the 745-35-10 A.
Adjusts settings for the transport clamp, including speed and return.
Defines how the transport clamp returns after operation.
Sets the waiting position for the transport clamp.
Accesses advanced service and diagnostic functions of the machine.
Adjusts basic machine settings and parameters.
Adjusts fundamental machine parameters, protected by a password.
Accesses diagnostic tests for machine components and functions.
Tests the sequence of operations in the machine's workflow.
Tests the functionality and parameters of the step motors.
Adjusts display settings and calibrates the touch screen of the control panel.
Performs software updates for the control panel and DAC comfort.
Runs various diagnostic tests on internal and external machine devices.
Tests the sewing motor's functionality, including speed and position.
Resets machine parameters, global settings, and programs to factory defaults.
Provides instructions for performing routine maintenance on the machine.
Instructions for updating the machine's software via USB.
Provides instructions for setting up the complete sewing unit.
Provides critical safety information and instructions for electrical connections.
Covers connecting the machine and accessories to the pneumatic system.
Guides through the final checks and initial sewing test after setup.
Lists common software error messages and their remedial actions.
To Next Page
