DURKOPP ADLER 745-35-10 A - Assembling the Control Panel

Setup
218 Operating Instructions 745-35-10 S/745-35-10 A - 03.0 - 04/2017
7.3.2 Assembling the control panel
Fig. 186: Assembling the control panel
To assemble the control panel:
1. Assemble the bracket (8) to the pin (5) using screws (3).
2. Tighten the control panel (1) to the bracket (8) using screws (4).
3. Tighten the ground cable (7) to the nut (5) using screws (2).
(1) - Control panel
(2) - Screw
(3) - Screws
(4) - Screws
(5) - Nut
(6) - Bolt
(7) - Ground cable
(8) - Bracket
①
⑥④⑦
④
⑧
②
③
⑤
③