DURKOPP ADLER 745-35-10 A - 4.15.3 Adjusting Corner Knife

Operation
36 Operating Instructions 745-35-10 S/745-35-10 A - 03.0 - 04/2017
To correct faulty stacking or blowing out:
1. Remove workpiece from light beam.
 You can start a new sewing process.
4.15 Corner knife station
4.15.1 Swiveling corner knife station in/out 745-35-10 S
Fig. 26: Swiveling corner knife station in/out 745-35-10 S
To swivel the corner knife station in and out:
1. Swivel the corner knife station (1) to the left.
 The knives are accessible for setup and service work.
2. Swivel down and engage the corner knife station under the sewing unit.
CAUTION
Risk of injury from sharp parts!
Cutting.
Swivel out the corner knife station only when the
sewing unit is switched off.
NOTICE
Property damage may occur!
Unless swiveled in all the way, the corner knife station can damage
the machine.
When swiveled in, the corner knife station engages audibly.
(1) - Corner knife station
①