DURKOPP ADLER 745-35-10 A - Vacuum Device (745-35-10 A)

Operation
Operating Instructions 745-35-10 S/745-35-10 A - 03.0 - 04/2017 51
4.19.7 Vacuum device (745-35-10 A)
If no in-house vacuum system is available, the vacuum device is required
for an accurate positioning of the workpieces.
Switching the vacuum device on
Fig. 42: Switching the vacuum device on
To switch on the vacuum device:
1. Activate the vacuum device on the control panel in the menu item
Machine parameters, ( p. 138).
2. Turn on the switch (1) at the control box of the vacuum device.
3. Switch on the vacuum device on the control panel in the menu item
Pocket parameters, ( p. 127).
(1) - Switch
①