Machine description
14 Operating Instructions 745-35-10 S/745-35-10 A - 03.0 - 04/2017
Fig. 4: Components of the machine 745-35-10 A (2)
3.3 Proper use
The machine may only be used with sewing material that satisfies the
requirements of the specific application at hand.
The needle thicknesses permissible for the machine are listed in the
Technical Data ( p. 245) chapter.
The machine is intended only for use with dry sewing material. The sewing
material must not contain any hard objects.
The seam must be completed with a thread that satisfies the requirements
of the specific application at hand.
The machine is intended for industrial use.
(6) - external winder
(7) - Compressed air gun
(8) - Control DAC comfort
(9) - Compressed air maintenance unit
To Next Page
Loading...
Need help?
General
