Maintenance
Operating Instructions 745-35-10 S/745-35-10 A - 03.0 - 04/2017 201
6 Maintenance
This chapter describes maintenance work that needs to be carried out on
a regular basis to extend the service life of the machine and achieve the
desired seam quality.
Advanced maintenance work may only be carried out by qualified special-
ists ( Service Instructions).
WARNING
Risk of injury from sharp parts!
Punctures and cutting possible.
Prior to any maintenance work, switch off the
machine or set the machine to threading mode.
WARNING
Risk of injury from moving parts!
Crushing possible.
Prior to any maintenance work, switch off the
machine or set the machine to threading mode.
To Next Page
Loading...
