DURKOPP ADLER 745-35-10 A - Seam Securement RPM Settings

Programming
110 Operating Instructions 745-35-10 S/745-35-10 A - 03.0 - 04/2017
Sewing head parameters
 The display switches to Sewing head parameters.
Fig. 92: Sewing head parameters
Press a button to either open another submenu or enter the desired values
directly using the numeric keypad.
To edit the sewing head parameters:
1. Press the desired button.
 The user interface for setting the desired item is displayed.
Symbols Meaning
Set sewing speed
• 100 RPM - 3000 RPM
Set soft start parameters
• Soft start On/Off
• Soft start speed
• Number of stitches soft start
• Number of stitches needle thread clamp open
Activating continuous transport
OR
Activate intermittent transport
Set seam securement
• R.p.m seam begin.
• R.p.m seam end