DURKOPP ADLER 745-35-10 A - Machine Diagnostic Tests

Programming
148 Operating Instructions 745-35-10 S/745-35-10 A - 03.0 - 04/2017
Adjust transport clamp
 The display switches to Adjust transport clamp:
Fig. 122: Adjust transport clamp
To set the transport clamp:
1. Press the desired button.
2. Enter the desired value using the numeric keypad.
3. Confirm with OK.
Symbol Meaning
Lower transport clamp automatically On/Off
Set delayed lifting of transport clamp
• 0 ms - 1000 ms
Set transport clamp speed to waiting position
• 10% - 100%
Set transport clamp speed to corner knife
• 10% - 100%
Set waiting time until transport clamp moves to seam begin.
• Return transport delayed
• 0 ms - 1000 ms