DURKOPP ADLER 745-35-10 A - Loading Process Test Procedure

Programming
158 Operating Instructions 745-35-10 S/745-35-10 A - 03.0 - 04/2017
Information
Corner knife options (Without corner knife, Straight pocket, Straight/Slanted
pocket) must be set in the Machine configuration ( p. 137)
.
Test corner knife
 The display switches to Test corner knife.
Fig. 130: Test corner knife
To adjust the corner knives:
1. Press the desired button.
2. Enter the desired value using the numeric keypad.
3. Confirm with OK.
Symbols Meaning
Set corner knife correction seam begin.
• -99.9 mm - 99.9 mm
Set corner knife correction seam end
• -99.9 mm - 99.9 mm
Set the distance of the middle knife incision to the seam ends
• -99.9 mm - 99.9 mm
Set corner knife correction seam begin. left
•only for configuration: Automatic corner knife station
Set corner knife correction seam end left
•only for configuration: Automatic corner knife station