Programming
140 Operating Instructions 745-35-10 S/745-35-10 A - 03.0 - 04/2017
Selecting working method
The display switches to Select working method:
Fig. 115: Select working method
To select the working method and the matching seam length:
1. Select the desired working method (1).
2. Select the desired maximal seam length (2).
3. Restart the machine to activate the selection.
Information
When you switch to another class, tools that are not available for the
selected class may be removed from the toolbox on the start screen.
(1) - Working method (2) - Maximal seam length
To Next Page
Loading...
