DURKOPP ADLER 745-35-10 A - Corner Knife Parameters (Slanted Pockets - 745-35-10 A Only)

Programming
Operating Instructions 745-35-10 S/745-35-10 A - 03.0 - 04/2017 115
Corner knife (straight pocket)
 The display switches to Corner knife (Straight pocket).
Fig. 97: Corner knife (straight pocket)
To set the corner knife:
1. Press the desired button.
2. Enter the desired value using the numeric keypad.
3. Confirm with OK.
Symbols Meaning
Corner knife On/Off
Set corner knife correction seam begin.
• -9.9 mm - 9.9 mm
Set corner knife correction seam end
• -9.9 mm - 9.9 mm