DURKOPP ADLER 745-35-10 A - Transport Clamp Quick Adjustment (745-35-10 A Only)

Programming
Operating Instructions 745-35-10 S/745-35-10 A - 03.0 - 04/2017 123
Set waiting position of transport clamp
 The display switches to Waiting position of transport clamp.
Fig. 104: Set waiting position of transport clamp
To set the waiting position of the transport clamp:
1. Press the desired button.
2. Enter the desired value using the numeric keypad.
 Confirm with OK.
Symbols Meaning
Waiting position of transport clamp On/Off
Set up to waiting pos. of transport clamp
• 1 mm - 515 mm