DURKOPP ADLER 745-35-10 A - Creating a New Seam Program

Programming
98 Operating Instructions 745-35-10 S/745-35-10 A - 03.0 - 04/2017
Entering the name of a pocket program
To enter the name of a pocket program:
1. Use the letter and numeric buttons to enter the desired name of the
pocket program.
2. Confirm with OK.
 The display switches to the selected pocket program.
Copying a pocket program
 The display switches to Copy pocket program.
Fig. 82: Copying a pocket program (1)
To copy a pocket program:
1. Press the button.
Symbols Meaning
Select source
Select destination
Save settings