DURKOPP ADLER 745-35-10 A - Activating Flap Scan; Correction Light Barrier Settings

Programming
Operating Instructions 745-35-10 S/745-35-10 A - 03.0 - 04/2017 105
Set securement seam end right needle
Information
The settings in subitem Securement seam end right needle must
be made in the exact same way as in subitem Securement seam end
left needle ( p. 103).
Activating the flap
 The display switches to Flap scan.
Fig. 87: Activating the flap (1)
Symbols Meaning
Activate fixed seam length
• Set sewing length
Not available unless Activate sewing length has been selected
Activate flap scan with 1 light barrier
• Set maximum flap length
Not available unless Activate flap scan has been selected
Activate automatic flap scan left
• Light barrier must be activated in the Machine configuration
 p. 143